LabT1: MODULAR ULTRASONIC SYSTEM FOR LABORATORIES
One system, two applications
A single technology for two professional applications: WASHING AND EXTRACTION.
Efficiency, flexibility, and maximum performance in every process.
LabT1 is a modular ultrasonic system designed to adapt to a variety of laboratory needs.
Thanks to its advanced technology, it can be used for both professional component cleaning and the treatment and extraction of active ingredients.
THE CONTROL PANEL
The control panel includes:
- Knob for power variation.
- ON-OFF button to start or stop the ultrasound treatment with indicator light indicating the activation of the timed treatment for 5 minutes.
- 230Vac mains protection fuse.
- Power supply connection cable 230Vac-50Hz.
On the rear panel there is the connector used to connect the cylindrical tank to the generator module.
GENERAL CARACHTERISTICS OF ULTRASOUND SYSTEM LabT1
- Cylindrical tank made of special, corrosion-resistant stainless steel.
- External dimensions of the ultrasonic generator module: approximately 270 x 166 x 100h mm.
- External dimensions of the ultrasonic treatment reactor (cylindrical tank): approximately 123(d) mm x 210(h) mm.
- Internal dimensions of the cylindrical tank: approximately 118(d) mm x 114(h) mm.
- Weight (ultrasonic generator module + reactor-tank module): approximately 2.5 kg.
- Supplied accessories: Pyrex laboratory glass beaker (600 ml).
- High-performance, microprocessor-controlled electronic ultrasonic generator, suitable for intensive use and equipped with high-efficiency piezoelectric transducers.
- Single-phase power supply: 230 VAC, 50/60 Hz.
- Maximum power consumption: 100 W.
- Maximum power output of the ultrasonic generator: 100 W.
- Ultrasonic generator nominal frequency: 28kHz (automatic variation).
- Automatic limitation of maximum power output.
- Protection against excessive heating of the power circuit.
- Automatic control and modulation of the operating frequency (SWEEP) for optimal distribution of the ultrasonic field within the tank (maximum efficiency and uniformity of treatment of the washing liquid).
- Automatic TIMER for delayed treatment shutdown after 5 minutes of continuous operation.
- Front control panel of the generator with the following controls:
a) Activation/deactivation of the ultrasonic generator with mains power indicator light.
b) Continuous adjustment of the power output via potentiometer (from 20 to 100% of maximum power). - A control system continuously monitors the operating conditions of the ultrasonic generator and the washing tank, blocking the machine if the maximum temperature and/or operating current of the device exceed the permitted values.
- Regardless of the harsh conditions of use, the maximum power that can be supplied by the ultrasonic generator is automatically limited to a value established by the manufacturer.
ULTRASONIC CLEANING: deep, efficient and eco-friendly cleaning.
Ultrasonic cleaning is the most advanced, efficient, and environmentally friendly cleaning technique. Powerful ultrasonic cavitation propagated within a fluid is the only way to meet the most demanding cleaning requirements for a wide range of objects made of different materials (professional, industrial, medical, and scientific sectors).
The parts are immersed in the cleaning liquid inside an ultrasonic reactor (the tank where the cleaning takes place). The size of the reactor tank depends on the size of the objects being treated.
The ultrasonic power is generated by a group of piezoelectric transducers that convert electrical energy (with appropriate power and frequency) into mechanical vibrational energy: millions of microscopic bubbles are generated in a vacuum that implode under the effect of the pressure variations generated by the ultrasound, quickly and efficiently removing all dirt particles, even the most stubborn ones.
ULTRASONIC TREATMENT: extraction of active plant ingredients in a simple, practical, economical and sustainable way.
The intense and focused cavitational action of ultrasound facilitates the breakdown of plant cell walls, improving extraction yields and reducing processing times compared to traditional methods.
The LabT1 system is perfect for artisanal or laboratory production of:
Plant active ingredient extracts:
- Extraction of essential oils (lavender, mint, rosemary, citrus, etc.).
- Extraction of polyphenols, flavonoids, alkaloids, terpenes, anthocyanins, tannins.
- Preparation of extracts for natural cosmetics or phytotherapeutic products.
- Extraction of natural pigments (chlorophyll, carotenoids, curcumin, etc.).
Natural cosmetics and aromatherapy products:
- Concentrated extracts for creams, lotions, conditioners, and natural shampoos.
- Flavors and fragrances for aromatherapy or room fragrance.
- Small quantities of high-yield lipophilic or hydroalcoholic macerates.
Food and nutraceutical products:
- Extraction of natural flavors or functional additives from plants, spices, or fruits.
- Production of antioxidant extracts for food supplements or functional beverages.
- Improved extraction of aromatic substances in experimental liqueurs or infusions.
